Easy DIY Floating Shelf with Brackets

Easy DIY floating shelf with brackets on wall

On the main wall in our living room, we added an easy DIY floating shelf with brackets. It was one of my favorite projects in our modern rustic living room makeover and is a major focal point in the room! This project was super easy and you only need one piece of wood and a set of brackets!

Note, this post contains some affiliate links. For more info see my disclosures here.

In the past I’ve made a DIY floating shelf with no brackets for my office makeover. But this time I wanted to keep things more simple and use hidden, heavy duty steel brackets. The advantages to using these steel brackets were that I could use them with solid wood (that’s 1.5″ thick) and they were easy to install and they are easy to remove (if needed in the future). Also, I love that they are hidden which provides a more modern floating shelf look!

How to Make an Easy DIY floating shelf with brackets

Materials:

Tools:

1.  Cut wood to size

First, determine how long your floating shelf needs to be. I made my floating shelf 55″ long so it was about 2/3 the size of our couch since I was installing it over the couch. If you need to make it longer than that you may need to get more than one set of brackets.

Use a miter saw and cut your 2×8 to size. Or have your home improvement store make the cut for you.

 

2.  Sand and stain floating shelf

At this point I found it was easiest to go ahead and sand and stain my floating shelf. I used Provincial by Minwax for my stain color. I skipped the top coat since I wanted a very matte look and didn’t need a sealant since the shelf is just for decor.

 

3.  Hang brackets on the wall

First use a studfinder and determine where the wall studs are where you want to hang your floating shelf. Your brackets will need to be spread out enough to distribute the weight of your shelf. Ideally you want to hang the brackets on the wall studs. However, if the studs don’t fall where you need the brackets to be then you will need to drill into drywall and use the anchors that were included with the brackets. We ended up having to drill into drywall.

Hold the first bracket up to wall where you want to install it. Make sure the bracket is level, then mark the holes with a pencil.

Holding a level on floating shelf bracket

marking holes for steel bracket screws on wall

Drill pilot holes over the pencil marks. Then, tap the wall anchors into the holes with a hammer.

drilling pilot holes on wall for floating shelf brackets

tapping the wall anchors into the holes with a hammer

Next, install the bracket using the provided screws and drilling them into the wall anchors.

installing the first bracket using screws and drilling them into the wall anchors

After installing the first floating shelf bracket, hold the second bracket up to wall where you want to install it. Make sure the bracket is level with the first bracket, then mark the holes with a pencil and repeat the same steps used above for installing the first bracket.

two heavy duty steel floating shelf brackets hung on the wall

 

4.  Drill bracket holes in DIY floating shelf

Place your floating shelf on top of the wall brackets exactly how you want it to be once installed. Mark with a pencil the center point over the bracket. Then, mark the center point of this location on the shelf edge where the holes will be drilled.

Marking floating shelf where bracket centerpoint is located

You want to drill your bracket holes about 6″ – 6 1/4″ deep to properly fit the brackets. Drill the bracket hole with the 7/8″ drill bit and use a tape measure to enure it’s at least 6 inches deep.

drilling hole for floating shelf bracket

drilling hole for floating shelf bracket

drilling hole for floating shelf bracket

 

5.  Install easy DIY floating shelf on wall

Carefully slide the floating shelf onto the wall brackets. And that’s it! Now it’s time to decorate it and enjoy!

easy DIY floating shelf with two holes before installing on wall

Instaling easy DIY floating shelf on wall brackets

I love how our floating shelf looks over the couch in our living room! It’s so fun to decorate with the changing seasons!

Easy DIY floating shelf made out of solid wood

I couldn’t decide if I preferred decorating the floating shelf with pink azaleas or white hydrangeas! Which do you like better?!

Easy DIY floating shelf with brackets

Easy DIY floating shelf with hydrangeas in two vases

Hope this easy DIY floating shelf with brackets tutorial has been helpful! Follow along on my latest projects and sneak peaks on Instagram and Pinterest!

 

 

Get instant access to the library of FREE printables for the home!

Subscribe and get home decor tips, DIY tutorials, and access to the library of FREE printables for the home!

Powered by ConvertKit

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.